null Skip to main content
Audiophile Learning Center

Music Hall MMF-1.3 Turntable - Black, Built-In Phono Preamp, Audio-Technica AT3600L Cartridge

Click on image to enlarge.

Share
SKU: MHMMF13-BLK
WARNING: for more information go to http://www.P65Warnings.ca.gov

Music Hall's new MMF-1.3 entry-level turntable provides a feature set and overall performance that is unrivaled at its price.

    $349.00
    $349.00
    In Stock
    Have a Question? Ask Our Experts!

    Entry-level Table with Unrivaled Feature Set

    Music Hall's new entry-level turntable provides a feature set that is unrivaled at its price. With a built-in phono preamplifier and a quality, pre-mounted cartridge, the MMF-1.3 is everything you need to start listening to vinyl right out of the box.

    Three Speeds to Play ALL Your Records

    The MMF-1.3 doesn't just do a great job with your LPs. It plays ALL of your records, including those golden oldies from bygone eras. A built-in speed control circuit ensures the electronic accuracy of the MMF-1.3’s three speeds. A simple twist of a knob lets you choose 33-1/3 rpm, 45 rpm, or 78 rpm playback speed. A thick rubber mat – which rests upon an aircraft-grade aluminum platter – dampens ambient vibration to make all of your music sound the best that it can sound.

    Built-in Phono Preamp

    Most turntable require that you plug them into a dedicated Phono input on your preamp, integrated amp, or receiver. However, the majority of preamps, integrated amps, and receivers don't have a dedicated Phono input. So with most other turntables, you need to have your own phono preamplifier to plug your turntable into, and then you plug the preamp into your other gear. The MMF-1.3 saves you that expense and hassle by incorporating a built-in phono preamp. This lets you plug it directly into any standard line-level input on your preamp, integrated amp, or receiver. That's all there is to it.

    Simple Set-up!

    The MMF-1.3 isn't one of those turntables that takes a long time to set up before you can start listening to music. On the contrary, it's nearly ready to go right out of the box, needing only a few adjustments to get you off and running. The belt comes pre-mounted to the platter, making installation a snap.

    Includes Audio-Technica AT3600L Cartridge

    A quality Audio-Technica cartridge is pre-mounted and precision-aligned. It's a nice sounding moving magnet cartridge with a diamond stylus, and it works beautifully with the MMF-1.3's dynamic balanced aluminum tonearm.

    Hinged Dust Cover Included

    A clean turntable is a happy turntable, so Music Hall goes the extra mile with the MMF-1.3. A hinged dust cover keeps your MMF-1.3 protected from dust, dirt, and other airborne debris when not in use.

    Also included are vibration damping feet and removable RCA cables for connection to your preamp, receiver, or integrated amp.

    Product Features

    • Belt drive turntable
    • Electronic speed controlled motor
    • Three speeds: 33 1/3, 45, and 78 rpm
    • aluminum tonearm with
    • Removable headshell
    • Piano black MDF plinth
    • Vibration-damping rubber platter mat
    • Audio Technica AT3600L cartridge ($50 value)
    • Aluminum platter
    • Dust cover
    • Built-in phono pre-amp
    • Removable RCA cables
    • Vibration damping feet

    Product Specs

    Turntable
    • Type: 3-speed full manual
    • Motor: DC motor
    • Driving method: belt drive
    • Turntable platter: 296mm dia. aluminum die-cast
    • Speeds: 33 1/3, 45, and 78rpm
    • Wow and flutter: typical: less than 0.1% WTD at 3KHz RMS
    • Lmit: Less than 0.15% WTD at 3KHz RMS
    • S/N ratio: more than 62dB (DIN-B)
    • Speed tolerance: 3000Hz +/-1%
    Tonearm
    • Cartridge: AT3600L
    • Output voltage: 2.5mV +/- 3dB at 1KHz 3.54cm/sec
    • Channel separation more than 18dB
    • Channel balance: within 2dB at 1KHz
    • Frequency response: 0 +/-3dB at 10KHz (AT6606A)(Value at 10KHz based on value at 1KHz)
    • Tracking force: 3.5 ± 0.5 g
    Tonearm
    • Type: dynamic balanced straight shaped w/soft damping control
    • Effective arm length: 221.5mm
    • Overhang: 19mm
    • Offset angle: 25.61
    • Tracking error angle: 3 degrees or less
    • Stylus pressure adjustment method: rotation movability
    • Arm lifter: oil damper type
    General
    • Power supply: DC12V,2.0A
    • Power consumption: 4W
    • Dimensions: 17.1(W) x 14.5(D) x 4.2(H) in.
    • Weight: 11lbs.

    DISCOVER EXPERT TIPS

    Audio Advisor Learning Center - Level Up Your Audio Education

    Customer Reviews

    Back to Top