null Skip to main content

Ask an Expert

1-800-942-0220 Weekdays: 9am - 7pm EST
Audiophile Learning Center
Ultimate Audiophile Gift Guide Shop Now

NAD C 379 HybridDigital Amplifier with BluOS

Click on image to enlarge.

Share
SKU: NAC379-BLUOS
WARNING: for more information go to http://www.P65Warnings.ca.gov


Embodying half a century of audio mastery, the NAD C 379 is everything you'd expect from a Classic Series amplifier. Order it with or without the optional MDC2 BluOS-D module.

Embodying half a century of audio mastery, the NAD C 379 is everything you'd expect from a Classic Series amplifier. Order it with or without the optional MDC2 BluOS-D module.

    $1,499.00
    $1,499.00
    In Stock
    Have a Question? Ask Our Experts!

    Everything you'd expect from a Classic Series amplifier

    Embodying half a century of audio mastery, the NAD C 379 is everything you'd expect from a Classic Series amplifier.

    Continuing NAD's tradition of delivering simplicity, value, and innovation, the C 379 features the latest generation of MDC technology. It also features 80 watts per channel of NAD HybridDigital™ UcD amplification and a high-performance ESS SABRE DAC that lets you experience music with exceptional sonic detail and clarity.

    If you're a vinyl enthusiast, you will appreciate the built-in high-quality MM phono stage, and the built in headphone amplifier provides superior private listening.

    Maximum Power and Performance

    Every detail of the C 379's design has been refined for maximum performance. Starting with a customized version of the proven HybridDigital UcD output stage, the C 379 operates in a fully balanced bridge configuration. This allows for massive power with nearly immeasurable distortion and noise in the audible range.

    The power supply is capable of 80 watts continuously and over 120 watts instantaneously to allow for short-term musical transients. For even greater power, the C 379 can be bridged in mono with the C 268 power amp to provide up to 300 watts per channel of distortion-free sound.

    Brilliant Musicality and Detail

    The C 379's digital architecture is built around the critically acclaimed ESS SABRETM ES9028 DAC, one of the industry's highest performance 32-bit digital-to-analog converts with unprecedented dynamic range and ultra-low distortion.

    It provides ultra-high-quality music playback, free from clock jitter common in digital audio systems. The results are an exceptionally wide dynamic range, ultra-low distortion, accurate sound stage and unparalleled clarity.

    Future-Proof Flexibility

    Since 2006, NAD has led the way in providing users the flexibility to add features as new A/V technologies are introduced to provide unparalleled performance and value.

    Now, with the second generation of NAD's Modular Design Construction (MDC) technology, the C 379 is in a class of its own. It features two MDC2 slots for upgrading the amplifier's capabilities with emerging A/V technologies and additional features, including BluOS™ high-resolution multi- room streaming and Dirac Live Room Correction.

    Optional BluOS-D Module for Hi-Res Streaming and Much More

    Order the C 379 with or without the optional MDC2 BluOS-D module. This module lets you add Dirac Live, BluOS, Apple AirPlay 2, two-way aptX™ HD Bluetooth, and more features and capabilities to the C 379.

    With BluOS, the C 379 can be connected to a home network via Wi-Fi or Ethernet to experience the most advanced multi-room wireless music management system with 24 bit/192kHz resolution. Controlled through the BluOS app for smartphone, tablet, or desktop, BluOS manages your digital music collection and connects to over 20 high-quality streaming music services including Tidal, Deezer, Qobuz, Amazon Music, Spotify, and more.

    Connect EVERYTHING!

    The C 379 is well equipped with a variety of analog and digital connectivity options including aptX HD Bluetooth, HDMI eARC, an MM Phono stage, and two subwoofer outputs. aptX HD can easily support 24-bit streaming from any Bluetooth enabled device, while HDMI eARC allows you to connect the C 379 to your TV and provide seamless control from your existing remote.

    It also includes a built-in high-performance headphone amplifier with low output impedance and high output voltage capability, allowing it to drive a wide range of headphones.

    Product Features

    • 2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)
    • 2 x 120 Watts per channel of Dynamic Power (4 Ohms)
    • Bridgeable for up to 300 Watts per channel of Continuous Power
    • Available with or without optional MDC2 BluOS-D module
    • Customized HybridDigital UcD Amplifier with Stereo and Bridge Modes
    • Industry-leading ESS SABRETM 32-bit/384kHz DAC
    • Dual MDC 2 Slots for Future Upgrades and Expanded Features
    • MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise
    • Built-in Separate Headphone Amplifier for Low and High Impedance
    • HDMI eARC, Optical Digital and Coax Digital Inputs
    • Dual Subwoofer Outputs

    Product Features

    • 2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)
    • 2 x 120 Watts per channel of Dynamic Power (4 Ohms)
    • Bridgeable for up to 300 Watts per channel of Continuous Power
    • Available with or without optional MDC2 BluOS-D module
    • Customized HybridDigital UcD Amplifier with Stereo and Bridge Modes
    • Industry-leading ESS SABRETM 32-bit/384kHz DAC
    • Dual MDC 2 Slots for Future Upgrades and Expanded Features
    • MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise
    • Built-in Separate Headphone Amplifier for Low and High Impedance
    • HDMI eARC, Optical Digital and Coax Digital Inputs
    • Dual Subwoofer Outputs

    Product Specs

    Line Input, Pre-Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.002 % at 2 V out
    • Signal-to-Noise Ratio: >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
    • Channel separation: >100dB (1 kHz); >90 dB (10 kHz)
    • Input Impedance (R and C) : 56 kohms + 100 pF
    • Maximum input signal: >4.6 Vrms (ref. 0.1 % THD)
    • Output impedance: Source Z + 320 ohms
    • Input sensitivity: 65mV (ref. 500 mV out, Volume maximum)
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Maximum voltage output -IHF load: >5 V (ref. 0.1 % THD)

    Phono Input, Pre-Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.01% at 2 V out
    • Signal-to-Noise Ratio: >84dB (200 ohms source; A-weighted, ref. 500 mV out)
    • Input sensitivity: 46 kohms/100 pF
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Maximum input signal at 1kHz: >80 mVrms (ref. 0.1 % THD)

    Line Input, Headphone Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.005% at 1V out
    • Signal-to-Noise Ratio: >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Channel separation: >62 dB at 1kHz
    • Output impedance: 2.2 Ohms

    Line In, Speaker Out (Analog Bypass On)

    • Continuous output power into 8 ohms and 4 ohms: 2 x 80W
    • THD (20 Hz – 20 kHz): <0.03 % (250 mW to 80 W, 8 Ohms and 4 Ohms)
    • Signal-to-Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
    • Clipping power: 150W
    • IHF dynamic power: 120W into 8 ohms; 200W into 4 ohms; 250W into 2 ohms
    • Peak output current: >26A (in 1 ohm, 1ms)
    • Damping factor: >100 (ref. 8 ohms 20 Hz – 20 kHz)
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Channel separation: >90dB (1 kHz); >75dB (10 kHz)
    • Input sensitivity (for 80 W in 8 ohms): 750mV/50kohms

    General Specs

    • Supports bit rate/sample rate: up to 32 bit/384 kHz
    • Frequency band: 2.402GHz- 2.480GHz
    • Maximum transmit power (dBm): 7 dBm ± 2 dBm
    • Dimensions (W x H x D): 17.1" x 3.9" x 15.4"
    • Weight: 19.1 lb.

    Product Specs

    Line Input, Pre-Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.002 % at 2 V out
    • Signal-to-Noise Ratio: >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
    • Channel separation: >100dB (1 kHz); >90 dB (10 kHz)
    • Input Impedance (R and C) : 56 kohms + 100 pF
    • Maximum input signal: >4.6 Vrms (ref. 0.1 % THD)
    • Output impedance: Source Z + 320 ohms
    • Input sensitivity: 65mV (ref. 500 mV out, Volume maximum)
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Maximum voltage output -IHF load: >5 V (ref. 0.1 % THD)

    Phono Input, Pre-Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.01% at 2 V out
    • Signal-to-Noise Ratio: >84dB (200 ohms source; A-weighted, ref. 500 mV out)
    • Input sensitivity: 46 kohms/100 pF
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Maximum input signal at 1kHz: >80 mVrms (ref. 0.1 % THD)

    Line Input, Headphone Out (Analog Bypass On)

    • THD (20Hz - 20kHz): <0.005% at 1V out
    • Signal-to-Noise Ratio: >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Channel separation: >62 dB at 1kHz
    • Output impedance: 2.2 Ohms

    Line In, Speaker Out (Analog Bypass On)

    • Continuous output power into 8 ohms and 4 ohms: 2 x 80W
    • THD (20 Hz – 20 kHz): <0.03 % (250 mW to 80 W, 8 Ohms and 4 Ohms)
    • Signal-to-Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
    • Clipping power: 150W
    • IHF dynamic power: 120W into 8 ohms; 200W into 4 ohms; 250W into 2 ohms
    • Peak output current: >26A (in 1 ohm, 1ms)
    • Damping factor: >100 (ref. 8 ohms 20 Hz – 20 kHz)
    • Frequency response: ±0.3 dB (20 Hz – 20 kHz)
    • Channel separation: >90dB (1 kHz); >75dB (10 kHz)
    • Input sensitivity (for 80 W in 8 ohms): 750mV/50kohms

    General Specs

    • Supports bit rate/sample rate: up to 32 bit/384 kHz
    • Frequency band: 2.402GHz- 2.480GHz
    • Maximum transmit power (dBm): 7 dBm ± 2 dBm
    • Dimensions (W x H x D): 17.1" x 3.9" x 15.4"
    • Weight: 19.1 lb.

    DISCOVER EXPERT TIPS

    Audio Advisor Learning Center - Level Up Your Audio Education

    Customer Reviews

    Back to Top