Pangea Audio AC-14 Power Cable

Extremely Clean and Noise-Free Power for Source Components

Pangea Audio's AC-14 power cable is specifically designed for source components, which do not require the same large amounts of current as receivers and amps. The AC-14 provides more than enough current while offering multiple shielding and other features that facilitate extremely clean and noise-free power.

Pangea designed the AC-14 specifically for wide-band delivery of power to line-level AV components. It will enhance the performance of preamps, CD players, DVD players, DACs, and other line-level components.

An Easy, Inexpensive Upgrade for Your AV Gear

The AC-14 was originally designed to replace the "stock" cable that comes with virtually all high-end electronics. The problems with these stock cables are multiple: poor connectors which don’t hold firmly in place, low-grade copper which is not the best conductor, and a lack of shielding. The shielding is the most significant issue. An unshielded wire receives and conducts RFI (radio frequency interference) and EMI (electromagnetic interference) from multiple sources both inside and outside you home and channels that interference directly into your highly sensitive electronics.

Pangea's AC-14 address each of these problems in a very cost-efficient way. So, spend less and hear the performance you paid for by using a high quality Pangea Audio AC-14 power cable!

99.99% High Purity OFC Copper Conductors

The AC-14's 99.99% purity OFC conductors provide maximum conductivity, while the 14-awg construction is for optimized line-level current delivery. The two-way multi-gauge geometry with isolated bass conductors enhances audio performance. Counter-spiraled conductors offer superior noise rejection, while the triple shielding provides RF- and EM-interference rejection while optimizing the isolation of sensitive source components.

Superior flexibility means easier installation, and the lightweight design doesn't impede the effectiveness of isolation devices. The AC-14's 24k gold-plated contacts offer superior electrical contact. Special two-shot molded connector bodies protect vital AC connections for maximum current delivery and long life.

Pangea Audio Power Cables

Pangea Audio power cables offer the perfect balance of power, shielding, and flexibility for audiophile components. These cables have been designed, not from the AC wall outlet to the component, but the other way around – from the component to the wall outlet. The result is a cable that not only fully satisfies the 'real power requirements' of audiophile components, but which also delivers improved performance for both power and component isolation.

Pangea's 'component to the wall outlet' design results in a better cable that's designed just for the component you want to power. The cable gives you precisely what you need - no more and definitely no less.

More Isn't Always Better

Until now, all upgrade power cables have been designed according to a 'more is better' philosophy, leading manufacturers to increase the diameter of the conductor and the thickness of the insulation in an attempt to improve performance, but at the expense of flexibility. The resulting thick, noncompliant cables put a severe strain on the chassis of connected components.

Heavy, inflexible cables can also reduce the effectiveness of component isolation and suspension systems. This is a particular problem for sensitive source components (such as preamps, streamers, disc players, phono preamps, tuners, and DACs) that are typically placed on lighter suspension systems. Therefore, the AC-14 has been engineered for flexibility and to put less strain on your gear, including isolation accessories.

Product Features

Designed specifically for wide-band delivery of power to line-level AV components
Specifically designed to enhance the performance of preamps, CD players, DVD players, DACs, and other line-level components
99.99% purity OFC conductors for maximum conductivity
14-awg construction for optimized line-level current delivery
2-way multi-gauge geometry with isolated bass conductors
Counter-spiraled conductors for superior noise rejection
Triple-shielded for superior RF- and EM-interference rejection and for optimized isolation of sensitive source components
Superior flexibility for easier installation
Lightweight design doesn't impede the effectiveness of isolation devices
24k gold-plated contacts for superior electrical contact
Special two-shot molded connector bodies protect vital AC connections for maximum current delivery and long life

Note: Each Pangea cable is individually handmade to strict design specifications.

Q: Since the AC-14 is designed for source components, like CD players and preamps, can I still use it for my integrated or stereo power amp?

A: Yes! Thanks to its 14-gauge construction, the AC-14 will deliver many times the current of the stock cable that came with your integrated amp. And with its superior shielding, the AC-14 power cable will deliver far cleaner power, too. So your music will sound cleaner.

Q: Can I use the high-current AC-9 power cable with my preamp, CD player or DAC?

A: Certainly! In some cases, the AC-9 will offer a sonic improvement over the AC-14 when used with source-type components. There are many variables here that affect performance, including the nature of your power and the design of your source component. The best rule of thumb is to try it and see if you like the change. If you experience little of no improvement with the AC-9 and a particular source component, you can always switch back to the AC-14 cable.

Product Specs

Cable Outer Diameter: 12mm
Male End: Nema Type 5-15
Female End: IEC C13
Removable Ground Pin: No
Conductor Gauge: 14-gauge
Copper Type: Oxygen Free Copper

Product Warranty

Parts & Labor

5 Years For Cables Purchased Through Authorized Dealer

2 Years For All Other Products Purchased Through Authorized Dealer

Pangea Audio Warranty Information

Audio Advisor occasionally has fantastic deals on clearance items that are in excellent condition and we happen to have just one or two of.

Demo: Photo samples, gear we auditioned, items returned for wrong color/wrong size, etc.

Open Box: Contents briefly examined or inspected for promotional or internal purposes

Factory Refreshed: Original-condition items repackaged by the manufacturer

Cosmetically Blemished: A few dings or scratches, but functionally in original condition

Used: May show some signs of use

All clearance products are carefully inspected by our technicians before we offer the item for sale. All clearance products except Used items come with the original manufacturer warranty and are guaranteed to work and sound like new.

RETURN POLICY & PROCESS

NOTE:
You may only return a product purchased within 60-days of the receipt date.
The product must be in like-new condition and shipped in the original packaging (So SAVE THOSE BOXES!!!)

Call 1-800-942-0220 to request an RMA number.
Print the RMA number on the return shipping label.
Please make sure the return shipping name and address are written in a note on the inside.
Ship package to…

Audio Advisor Returns
5500 Executive Parkway SE
Grand Rapids, MI 49512
(PRINT YOUR RMA NUMBER HERE)

NOTE: If a coupon was used in the ordering process, then the final value (recorded during payment) will be the price refunded.

Returned products are inspected by our warehouse and refunds are issued within 24 hours of inspection. Please note: it may take 7-10 business days for your bank to show the refunded amount. If you do not see it then, please reach out to our customer service team at 1-800-942-0220.

Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.