EAT Acrylic Dust Cover for C-Sharp Turntable - Gray

The EAT C-Sharp Dust Cover — CNC-Machined, With UV-Bonded Joints

A gray acrylic dust cover for the EAT C-Sharp turntable, sold singly. It is CNC-machined from 5 mm acrylic with UV-bonded joints, which is what gives the edges a crystal-clear finish rather than the milky seam a glued cover shows.

Five millimetres is substantial for a cover panel. It resists flexing when you lift it, and it takes the knocks that eventually find anything sitting on a shelf at chest height.

Fit and Materials

Which Turntable

It is made for the EAT C-Sharp. Dust covers are cut to a plinth footprint and an arm height, so this is not a part that transfers to another deck even within the same maker's range.

The Numbers, and the Cutouts

20.7 by 18.7 by 6.9 inches, in the gray finish. There are handhold cutouts on each side so you have somewhere to grip, and a large 12.6-inch cutout at the back — which is what lets the cover sit down properly with the arm and cabling in place.

Who Is This Cover Best For?

• You own an EAT C-Sharp — this cover was machined for that turntable
• You care how the edges look — UV-bonded joints give a clear edge rather than a visible seam
• You lift the cover often — handhold cutouts on both sides are there for that
• Your turntable is on display — 5 mm acrylic is stiff enough not to flex as you handle it
• Your deck is a different EAT — covers are model-specific; see dustcovers for what else we carry

How Do You Fit It?

Lower it over the turntable using the side cutouts, letting the rear cutout clear the arm and cabling as it comes down. Lift it straight up rather than sliding it — acrylic against a plinth marks both surfaces.

Pairs Well With

What most owners keep alongside.

• Record brushes — a pass before each side, whatever the cover does
• Stylus cleaning — for the dust that reaches the stylus anyway
• Record mats — mat thickness affects the clearance under a cover
• Replacement styli — what settled dust costs in the end

Frequently Asked Questions

Will it fit my turntable?

It is made for the EAT C-Sharp. Other turntables, including others from EAT, use their own covers cut to their own dimensions.

How many do I need?

One, sold singly. It is a fitting rather than something that wears out.

What finish is it, and what are the dimensions?

Gray, at 20.7 inches wide, 18.7 inches deep and 6.9 inches high. The crystal-clear edges come from the UV-bonded joints rather than the panel, so a tinted cover still has a clean edge rather than a milky seam.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about turntable setup, record care, or getting the most from your vinyl? Visit our Learning Center for guides, tips, and expert advice.