USED - Parasound NewClassic 275v2 Two Channel Power Amplifier

Bold New Update of a Classic Power Amplifier

Parasound's NewClassic Model 275 power amplifier just received an update. It's been reborn as the NewClassic Model 275 v.2. See below for the lowdown on all of the great new features.

Thanks to Parasound, anybody can afford to get onboard its NewClassic series of amplifiers. With an advanced and extremely efficient low-heat design, this superb new product line of power amps runs cooler than previous Parasound Classic series models, making these amps ideal for rack or cabinet mounting. The newly designed power supplies deliver all the voltage you need for transient peaks in musical programs and stunning special effects.

New Version v.2 Features

This is the new v.2 version of the Model 275 with several new features for enhanced performance and convenience. First is a new A/B speaker button lockout switch on the rear panel. When this switch is set to Lockout, the front panel A and B buttons are disabled and speakers A and B will always be on. This can be particularly useful for a professional audio installer who never intends for the client to use the front panel buttons.

The new ultra-sensitive two-position audio trigger allowed Parasound to eliminate the audio trigger sensitivity knob. A 'Quieter' setting will automatically turn on the amp at a very low volume. If this isn't sensitive enough for your system needs, you can also use the 'Louder' setting.

The 12 volt trigger jacks change from 2.5mm to 3.5mm. The standard for 12 volt triggers in the audio world has become the 3.5mm size and all new Parasound products will change to use this larger size.

Here's one more change to the rear panel. The ground lift switch has been removed. Changes to the internal grounding of the amps make this switch unnecessary.

To conserve energy and meet Energy Star and EU power consumption requirement NewClassic amps only require 0.5 watts in standby.

Updated front and rear cosmetics give the v.2 amps a fresh new look. The front panel has been updated with rounded corners, a new display lens, and updated silk screening. The rear panel has updated silk screening making it easier to read and understand the functions.

There's also a power specification increase. The original versions of the NewClassic amps were underrated. With the v.2 amps, Parasound has changed the specification to match the actual capability of each amp. There is an average rating increase of 10-15%. Both version 1 and v.2 amps have the same power and there are no changes to the audio circuits.

The Perfect Amp for Smaller Rooms

The Model 275 v.2 is the perfect amplifier for smaller rooms with its 90-watt-per-channel output at 8 ohms and 150 watts at 4 ohms. It will also deliver 200 watts into 8 ohms or 4 ohms in bridged mono mode. And it boasts 30 amps of peak current per channel for superior resolution of demanding musical peaks. The sound quality is pure Parasound pleasure, of course.

Fully Discrete Circuitry

Fully discrete circuitry with a large toroidal transformer keeps the noise floor exceptionally low and the musical signal pure. The 'Class AB' circuitry provides efficient operation with less heat output than pure 'Class A' for the highest degree of reliability with DC servo and relay protection circuitry. Standby, channel status, and high temperature indicators keep you informed of the operation status.

Ideal for Custom Installations

The NewClassic amplifiers have several features that make them ideal for custom installation. These include automatic switch on and off when the amplifier detects the presence or absence of an audio signal. It can also switch on and off via its DC trigger with looping output. The soft touch power buttons glow in standby mode.

The Model 275 v.2 can drive and select two speaker pairs (or two mono bridged speakers) with two pairs of speaker terminals and speaker select buttons with relay switching.

Other features include handy rear-panel gain controls, gold-plated RCA input jacks and loop output jacks, and heavy-duty 24K gold-plated five-way speaker terminals.

Product Features

New v.2 Features

New A/B speaker button lockout switch (on the rear panel)
New ultra-sensitive two-position audio trigger (the old audio trigger sensitivity knob is no longer needed)
12 volt trigger jacks change from 2.5mm to 3.5mm
0.5 watt power consumption in standby
Updated front and rear cosmetics
Power Specification increase
Internal grounding of the amp allowed Parasound to remove the ground lift switch

Overview

Two channel amplifier
90 watts-per-channel into 8 ohms, both channels driven
150 watts-per-channel into 4 ohms, both channels driven
150 watts-per-channel into 2 ohms, both channels driven
200 watts bridged into 8 ohms mono or 4 ohms mono
30 amps peak current per channel
Impedance selector switch for 2W operation
Bridging switch for stereo or mono operation
A/B speaker terminals with individual on / off
18 dB / octave high-pass filter, switchable 20 Hz or 40 Hz
Fully discrete circuitry with toroid transfer
Efficient, low heat design
DC servo and relay protection circuits
Automatic on/off by DC trigger with looping output
Automatic on/off by audio signal
Gold-plated RCA input jacks, loop output jacks
Heavy duty 24K gold-plated five-way speaker terminals
Rear-mounted gain controls
115 V / 230 V selector on rear panel
Standby, channel status, high temperature indicators

Product Specs

Continuous RMS Power Output (20 Hz - 20 kHz, Both Channels Driven): 90 watts x 2, 8 ohms; 150 watts x 2, 4 ohms; 120 watts x 2, 2 ohms
Continuous RMS Power Output (20 Hz – 20 kHz, Bridged Mono): 200 watts, 8 ohms; 200 watts, 4 ohms
Current Capacity: 30 amps peak per channel
Frequency Response: 20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom: 1.3 dB
Total Harmonic Distortion: 0.035% at full rated output 0.025% at average listening levels
IM Distortion: 0.05 %
Transient IM Distortion: Not measurable
S/N Ratio: 110 dB at rated output, IHF A-weighted 103 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted
Input Impedance: 33 K ohms
Input Sensitivity: 800 mV for full rated output
Inter-Channel Crosstalk: 80 dB, 1 kHz; 72 dB, 10 kHz; 65 dB, 20 kHz
Damping Factor: Over 150 at 20 Hz
Auto Turn On - DC 9 - 12V, 15 mA
Auto Turn On - Audio 1.2 mV - 12 V, adjustable 15 minute turn off delay
AC Power Requirement: 110 - 120 V / 220 -240 V, 50 - 60 Hz 3 watts standby; 350 watts full output
Dimensions: 17-1/4" wide, 16" deep, with connectors 2-1/2" tall with feet, 1-1/4" panel only
Net Weight: 21 lbs.

Audio Advisor “Used” Product Warranty

What This Warranty Covers

This warranty covers defects in material and workmanship for used products purchased from Audio Advisor Inc. In the event your product fails, your sole remedy under this limited warranty shall be to return the product to Audio Advisor Inc. At the option of Audio Advisor Inc. the product will be repaired without charge for parts/labor or replaced.

Scope of Duration

The warranty period for "Used" condition units sold by Audio Advisor Inc. The warranty period for "Used” is one (1) year from date of purchase. These units have all been previously used and are specifically warrantied only for sales from Audio Advisor.

Shipping

You are responsible to pay for the safe and proper shipment of the warrantied product to Audio Advisor. Under this limited warranty, Audio Advisor will pay the cost of returning the repaired or replacement product to you.

What This Warranty Does Not Cover

This warranty does not cover damage due to: Failures arising from accident, catastrophe, misuse, neglect, or failure to properly connect and operate the Product in accordance with the accompanying instructions or specifications; Failures of any kind in Products which evidence any tampering, alteration, defacement of their serial numbers; Attempted servicing by anyone other than Audio Advisor; Failures arising from improper installation of the Product or incompatibility of other components in the system of which the Product is a part; Lack of routine maintenance; Connection to an improper voltage supply; Alterations or modification to the unit; Batteries or failure of or damage to Products caused by batteries; Fire, lightning, flood, "Acts of God", or other contingencies beyond the control of Audio Advisor Inc. Audio Advisor shall have no liability or obligation of any kind with respect to any of the foregoing types of failures.

Limitations on Persons and Products Covered

This warranty, and all rights provided hereunder, are limited to the original owner. In the event that the original owner transfers ownership of the Product prior to expiration of the applicable term stated in "Scope of Duration" above, this Warranty shall terminate in its entirety upon the date of such transfer. In no event will liability to you exceed the original purchase price of your unit. This warranty does not cover the cost of custom installation, customer instruction, setup adjustments, or signal reception problems. Consequential and incidental damages are not covered under this warranty. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. In the event that your warrantied product cannot be repaired, Audio Advisor will either replace or refund the cost of the unit. We reserve the right to replace any out-of-stock, discontinued, or limited edition products with a comparable product. Discontinued products may not be available for warranty replacement.

Warranty Service Within North America

If you have a problem with your “Used” product purchase, Contact Audio Advisor at 1-800-942-0220. To receive warranty service, you must first obtain a Return Merchandise Authorization (RMA) number prior to returning any item. The RMA number must be on all returned items. If it is not clearly marked, Audio Advisor will return the package back to you, freight collect.

Packaging and Shipping

The original packaging should be used for the safe transit of your “Used” unit to the warranty repair center. You are responsible for the cost of shipping the product to the RMA designated repair center. You should insure the product for its full retail value in the event it gets lost or damaged in transit. Audio Advisor is not responsible for damage incurred during the transit of products sent to us. Shipping your product in non-factory packaging may void this warranty.

State Law

This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Product Manual

	Parasound NewClassic 275v.2 Manual (PDF Format)

Parasound

USED - Parasound NewClassic 275v2 Two Channel Power Amplifier, Black