VPI Prime 21 Turntable - Walnut

Five Stars – What Hi-Fi? Magazine

New, Upgraded Version of VPI's Highly Acclaimed Prime Turntable

After the difficult year of 2020, the turntable experts at VPI decided to celebrate 2021 by giving the award winning VPI Prime a facelift and rebranding it as the Prime 21. The Prime 21 isn't a complete overhaul, since such an overhaul wasn't needed, considering the acclaim this high-performance turntable receives. Instead, VPI went with more of a refinement of existing virtues, based upon feedback from the customers, dealers, and audiophile press reviews.

The three main features of the Prime 21 are HW-40 feet for improved isolation and a lower table profile, a machined metal top plate for improved chassis bracing, and a 3D-printed gimbal arm as the standard arm. Taken together, these new upgrades provide better overall sonic performance from a 'table that's already known for outperforming far more costly models from other manufacturers.

Easy Set-up with Your Own Personal Expert

In addition to these three upgrades, VPI offers set-up help to make the entire experience much easier via an instructional video provided on a USB thumb drive. Plug it into your laptop or desktop computer (Windows, Mac, or otherwise), and you're ready to go with an expert at your side.

According to VPI, the process has been so well thought out that you can remove your turntable from the box, calibrate and connect it, and be ready to spin some vinyl in under twenty minutes. No special assembly skills are needed, and the tools you need are included in the box.

Improved Isolation

The HW-40 feet definitely give the Prime 21 the edge compared to the Prime. These feet have proven to be VPI's best isolators without breaking the bank. In fact, they are the same isolation feet used on VPI’s five-figure anniversary edition HW40 turntable and offer "supreme balance and dampening." The feet also give the Prime 21 a lower profile, which makes the whole appearance of the table clean and easier to fit into shelf space.

Improved Resonance Cancelling, Grounding, and More

The machined metal top plate of the Prime 21 is another well-considered improvement. VPI's engineers moved the bottom plate to the top of the chassis and then added more metal to wrap around the post braces. This makes the chassis more rigid for improved resonance cancelling. Also, all assemblies are mounted to the top plate, creating a more efficient ground that's shared among the components. The metal along the top has a structural benefit, too. It improves upon the build efficiency of the entire turntable.

Prime 21's Gimbal Arm is King

The Prime 21 comes with a very high-quality 3D-printed gimbal arm. Since VPI began offering its gimbal arm as a readily available option for its turntables in 2017, requests for the gimbal version have slowly but increasingly outpaced requests for the standard uni-pivot mount. Both uni and gimbal arms have their own unique sound signatures, but for the Prime turntable, gimbal has become king. Also, the gimbal mount makes cartridge installation easier, and it has a nicer feel for customers who are new to turntable use.

A Serious Synchronous Motor and 20-Pound Platter

Prime 21 uses a 300-rpm, 24-pole AC synchronous motor capable of high torque and quiet operation. For superior isolation, the motor is installed in a separate aluminum and steel machined assembly.

For unsurpassed speed stability, Prime 21 boasts a 20-pound damped platter machined from 6061 aluminum to an astonishing +/- .001” tolerance in a 39” circumference. The inverted bearing consists of a hardened stainless steel shaft plus a 60 Rockwell chrome hardened ball spinning in a phosphor bronze bushing and sitting on a PEEK thrust disc. The belt side load is placed at the center of the spinning bearing for zero 'teeter-totter' effects.

The motor pulley has an accuracy of +/- .0005” when leaving VPI's factory and has a wow and flutter rating of >0.1%, speed accuracy of >0.03% and rumble of >85db down.

Product Features

New aluminum top plate braces the chassis to deaden unwanted vibrations
All-new 3D-printed tonearm pre-mounted
Uni-pivot arm mount of earlier Prime models replaced by a new gimbal system
Same feet as in VPI’s anniversary edition HW40 turntable for "supreme balance and dampening"
Classic 20-pound platter and bearing
Platter machined from 6061 aluminum to +/- .001” in a 39” circumference
300 rpm 24 pole AC synchronous motor capable of high torque and quiet operation installed in a separate aluminum and steel machined assembly
Motor pulley has an accuracy of +/- .0005” when leaving factory
Instructional turntable set-up video provided on a USB thumb drive
Turntable set-up tools are included in the box
Enhanced Prime 21+ version also includes a mounted VPI Shyla cartridge ($1,750 value) and a VPI Weisline Phono Cable ($700 value)

"Here is a turntable that offers up a lot, a robust build quality, innovative design, smooth operation, and a rich, full, and powerful sound. If I were to describe the general tonal balance, overall I found the Prime 21 leaned just a hair towards the warm side of neutral, with a love for controlled, well-extended bass. But, it was fortunately never ‘laid back’, ‘mellow’ or ‘bloated’, which would be insults to the wonderful engaging sound this table produced. It has impeccable speed accuracy, beautiful silky highs, and does wonders with vocal texture and clarity."

"The VPI Prime 21 took a winning formula and refined it into something truly exceptional."

- Michael Johnson, Audiophilia, August 27, 2021

Five Stars – What Hi-Fi? Magazine

"The VPI Prime 21+'s amount of punch, sense of power and degree of insight put it thoroughly among the class leaders. This is a hugely capable and rounded package with a wide range of sonic talents that work across musical genres.

"Add solid build, ease of set-up and the generous supply of accessories in the box, and it’s clear that VPI has pushed its Prime turntable a useful step forward. If you’re looking for a record-playing package at this level, this one simply has to be on your shortlist."

- What Hi-Fi? magazine, November 11, 2020

Audio Advisor occasionally has fantastic deals on clearance items that are in excellent condition and we happen to have just one or two of.

Demo: Photo samples, gear we auditioned, items returned for wrong color/wrong size, etc.

Open Box: Contents briefly examined or inspected for promotional or internal purposes

Factory Refreshed: Original-condition items repackaged by the manufacturer

Cosmetically Blemished: A few dings or scratches, but functionally in original condition

Used: May show some signs of use

All clearance products are carefully inspected by our technicians before we offer the item for sale. All clearance products except Used items come with the original manufacturer warranty and are guaranteed to work and sound like new.

RETURN POLICY & PROCESS

NOTE:
You may only return a product purchased within 60-days of the receipt date.
The product must be in like-new condition and shipped in the original packaging (So SAVE THOSE BOXES!!!)

Call 1-800-942-0220 to request an RMA number.
Print the RMA number on the return shipping label.
Please make sure the return shipping name and address are written in a note on the inside.
Ship package to…

Audio Advisor Returns
5500 Executive Parkway SE
Grand Rapids, MI 49512
(PRINT YOUR RMA NUMBER HERE)

NOTE: If a coupon was used in the ordering process, then the final value (recorded during payment) will be the price refunded.

Returned products are inspected by our warehouse and refunds are issued within 24 hours of inspection. Please note: it may take 7-10 business days for your bank to show the refunded amount. If you do not see it then, please reach out to our customer service team at 1-800-942-0220.

Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.